During the manufacturing process, the individual components are bonded together using the same material. This is leading edge for the production of large-size components, parts with undercuts and designs with cooling channels. We produce SiSiC components with maximum dimensions of approximately 950 x 950 x 500 mm.
Our SiSiC advantages:
High stiffness and strength
Low thermal expansion coefficient
High thermal conductivity
Extremely homogeneous material
Joining areas with identical material properties, such as E modulus and strength
No contamination of bulk material with impurities
Our oxide and non-oxide ceramic materials also enable the production of very thin lightweight structures with extremely high strength and reliability.
Advantages of our material, engineering, and machining capabilities:
Realization of very high aspect ratios and thickness down to 2 mm
Uniform material properties due to monolithic design
High strength, extreme stiffness and reliability at lowest weight
Utilization of flexible, CAD-assisted machining to provide a large variety of contours and dimensions
EDM Machining of microstructures below 1 mm due to high electric conductivity